Skip to main content

Improve Your Experience

You are using a browser version that we do not support. Please use one of these supported browsers:

Residential Programs

Incentives


To qualify for an incentive:

  1. Customer must call Energy Services for pre-approval BEFORE beginning the project.
  2. Customer must have a current PUD account.
  3. The primary source of heat for the home must be electric.
  4. Guidelines must be followed to qualify.

Smart ThermostatSmart Thermostats

Smart thermostat incentives available JULY 1, 2020. Invoice MUST be dated July 1, 2020 or after in order to qualify.

  1. Visit  BPA's Product List to make sure your new smart thermostat qualifies for an incentive. Scroll down to Residential Sector/HVAC, and click on "Smart Thermostat Qualified Products List.
  2. Completed  Smart Thermostat Project Incentive Form.
  3. Invoice showing purchase date, cost and model purchased.
  4. Photo of installed smart thermostat.

Incentive amount: $140. (Incentive amount may not exceed the cost of the product.)

Get more info on our  Smart Thermostat info sheet.

Stop Picture from expanding past this point

Heat Pump Water Heaters

  1. Photo of existing electric storage water heater installed.
  2. Visit  BPA's HPWH Qualified Products List to make sure your new heat pump water heater qualifies for an incentive. Scroll down to Residential Sector/Water heating, and click on "Heat Pump Water Heater Qualified Products List."
  3. Completed Heat Pump Water Heater Installation Form.
  4. Invoice showing purchase date and model purchased.
  5. Photo of newly installed heat pump water heater.

Incentive amount: 

Tier 1:  not available 

Tier 2:  not available 

Tier 3:  50 gallons and above - $800 

Tier 4:  50 gallons and above – $900 

Tier 3 & Tier 4 - 40 gallons - $700 

Get more info on our  Heat Pump Water Heater info sheet.

Insulation installed in atticInsulation

  1. Pre-inspection
  2. Completed  Residential Insulation Project Information Form 
  3. Invoice that shows the purchase date and square footage of the insulation purchased.
  4. Post-inspection

Incentive amount: Varies by primary heat source, area of insulation, etc.

Stop Picture from expanding past this point

Before and after of window replacementWindows

  1. Pre-inspection
  2. Completed  Residential Window Project Information Form.
  3. Invoice that shows purchase date, cost and dimensions of EACH window. The dimensions MUST match what is listed on the PUD form.
  4. Sticker for EACH window showing that the U-value is 0.30 or less, OR a spec sheet showing the dimensions and that U-value of each window is 0.30 or less.
  5. Post-inspection.

Incentive amount: $6 per square foot of glass replaced.

Stop Picture from expanding past this point

Front doorDoors

  1. Pre-inspection
  2. Completed  Residential Door Project Information Form.
  3. Invoice that shows purchase date, cost and model number.
  4. Documentation showing the model number and that it is a pre-hung Energy Star Door.
  5. Post-inspection.

Incentive amount: $40.

Stop Picture from expanding past this point

Ductless heat pumpDuctless Heat Pump

NOTE:  New requirements below for installs on or after October 1, 2023.

  1. Projects must be installed by a licensed and bonded contractor.
  2. Product must be rated with a minimum of HSPF 9.0 to qualify for installations prior to 10/1/2023.  Product must be rated with a minimum of HSPF 8.8 or HSPF2 7.5 to qualify for installs on or after 10/1/2023.
  3. Completed  Residential Ductless Heat Pump Participation Form.
  4. Invoice showing the purchase date.
  5. AHRI Certificate.
  6. Documentation showing that the requirements have been met - manufacturer, model number, type, size of product installed.
  7. Post-inspection.

Incentive amount: $800

Air-Source Heat Pump or Variable Speed Air-Source Heat Pump

This incentive applies to retrofits only. Upgrades do not qualify.

NOTE:  New requirements below for installs on or after October 1, 2023.

  1. Projects must be installed by a licensed and bonded contractor.
  2. Product must be rated with a minimum of HSPF 9.0 or HSPF2 7.6 and SEER 14 or SEER2 13.4 for installations prior to 10/1/2023.  Product must be rated with a minimum of HSPF 8.8 or HSPF2 7.5 and SEER 15.0 or SEER2 14.3 for installations on or after 10/1/2023.
  3. Completed  Non PTCS Heat Pump Project Information Form.
  4. Invoice showing the purchase date.
  5. AHRI Certificate.
  6. Documents showing that the requirements have been met - manufacturer, model number, type, size of product installed.
  7. Post-inspection.

Incentive amounts: 

Air-Source Heat Pump:  $1,000

Variable Speed Air-Source Heat Pump:  $1,200

Stop Picture from expanding past this point

NEEM home plaqueNEEM Homes

We have incentives available for NEEM (Northwest Energy Efficient Manufactured) homes. 

 Read more on the website.

  1. Completed  PUD form.
  2. Invoice with purchase date and cost.
  3. NEEM 1.1 or 2.0 certification of compliance.
  4. Post-inspection.

Incentive amount: NEEM 1.1 - $1,000; NEEM 2.0 - $1,200.

Stop Picture from expanding past this point

Energy Audits


Why is my energy usage so high? How can I reduce my usage? If you've ever asked yourself these questions, then we're here to help you find the answers. We can conduct a free energy audit on your home to answer these and many other questions you might have about your use of electricity. A great way to monitor energy usage on your own is through our  SmartHub online program or app.

Check out our blog entry if you'd like to do your own  basic home energy audit.

Contact Kim Johnson in Energy Services for more details or if you have issues downloading the forms at  kimj@okpud.org