Skip to main content

Improve Your Experience

You are using a browser version that we do not support. Please use one of these supported browsers:

Behind the Meter

power meter

Learn more about the PUD and what we do, how we do it and why, as well as get some tips on conserving energy and staying safe around electricity.    

Selected Story


While you are at home and may be concerned about energy usage, you can do a basic energy audit to identify problem areas. You can then make changes to lower your energy usage and in turn, save money!

INSULATION: Proper insulation keeps homes at the desired temperature throughout the year. For Okanogan County, the ideal R-values (insulation measurement) are: attic – R49, floor – R30, walls – R11. You can check the R-value by measuring the depth of the insulation. Wall insulation is more difficult to reach - a licensed electrician may help you by turning the circuit breaker off, removing the outlet and checking for insulation in the wall. Once you have determined the depth of your insulation, use this online calculator to figure the R-value: https://www.lowes.com/n/calculators/r-value-insulation-calculator.

AIR LEAKS: Make sure all of your windows and exterior doors are closed to prevent a draft. Keep interior doors open. Turn on all air vents – bathroom, stove, etc. Use an incense stick or something similar or a damp hand and check windows and doors for air leaks. Does the smoke move toward the windows, doors, etc.? Can you feel air movement with the damp hand? If so, this is an indication of an air leak. Seal any leaks with caulk or weather stripping. Check ductwork for leaks, too, and seal with professional-grade masking tape.

HVAC: Heating and cooling is the No. 1 consumer of energy in homes. Replace filters as needed and have your system checked annually to make sure that it’s running at peak efficiency. Systems more than 15 years old may need to be upgraded to a more energy-efficient system.

WATER HEATER: These are No. 2 on the list for energy usage in homes. Keep your thermostat set at 120 degrees or less. If your water heater is continually running, it could be that an element has burned out, and it will use more energy.

LIGHTING: Upgrade bulbs to LED. Installing controls such as dimmers or timers can also save energy.

MANUFACTURED HOMES: Check under the belly of the home. Critters can get underneath and loosen pipes and tear out insulation. Repair damage to save energy.

The Okanogan PUD receives incentive funds from Bonneville Power Administration for insulation, windows, doors and ductless heat pumps. For more information, visit the PUD webpage, https://www.okanoganpud.org/energy-services/programs, or contact Kim Johnson in Energy Services at 509-422-8428 or kimj@okpud.org.

 

More News Articles

Every winter, our region experiences its highest average bills of the year. December 2022 was particularly rough, with record-breaking cold…

We all know that meters keep track of how much electricity our homes and businesses use, but do we properly take care of that meter?

We might not think about this too much when it’s a nice spring day, but it’s always a good idea to have an outage kit ready – especially if the…

Most of us have probably been guilty of setting something on top of one, or leaning things against it, or forgetting it exists entirely, but let’s…

POWERLINE SAFETY

In the movies, a downed powerline sparks and flails around dramatically and it’s an obvious hazard. But danger around…

This is Part 5 of 5 regarding the energy usage costs of common household items. The more we realize how much energy we use, the more we can find…